Yealink MVCS90 how to reset the unit
Yealink MVCs90: How to Reset the Unit
If you are experiencing issues with your Yealink MVCs90 unit and need to reset it, there are a few steps you can follow to troubleshoot the problem. Below, you will find a guide on how to reset the unit to its default settings.
Resetting the Yealink MVCs90 Unit
To reset the Yealink MVCs90 unit, follow these steps:
-
Power Off the Unit: Ensure that the unit is powered off before proceeding with the reset.
-
Locate the Reset Button: The reset button is typically located on the back or bottom of the unit. It may be labeled as "Reset" or represented by a small pinhole.
-
Press and Hold the Reset Button: By using a paperclip or a similar tool, press and hold the reset button for at least 10 seconds. This will initiate the reset process.
-
Release the Reset Button: After holding the reset button for the specified time, release it and wait for the unit to reboot.
-
Wait for Reboot: Allow the unit to reboot and initialize the reset process. This may take a few minutes.
-
Verify the Reset: Once the unit has rebooted, verify that the reset was successful by checking if the unit has returned to its default settings.
Additional Tips
- If the reset process does not resolve the issue, consider contacting Yealink support for further assistance.
- It's important to note that resetting the unit will erase any customized settings, so be sure to back up any important configurations before proceeding with the reset.
By following these steps, you should be able to reset your Yealink MVCs90 unit and troubleshoot any issues you may be experiencing. If you continue to encounter problems, don't hesitate to reach out to the manufacturer for additional support.